Gentex PureFlo PF3000P, Инструкция пользователя

Страница: 32 / 40

31 SERVICING
PF3000P
NOTE:
Do not allow any dirt or elements,
which may obstruct the air flow to
enter the air inlet.
(Figure 34)
Make sure that the HEPA
filter is fitted correctly
into a filter cover housing
with filter label facing
upwards as fitted to the
respirator. (Figure 35
)
If hood anti-recirculation gasket or pre-filters (PF3000-04-004 or PF3000-04-005) are
to be used, these must be placed in the filter housing before the HEPA filter is fitted as
shown on pages 15 - 16
Fit new HEPA filter before refitting the filter cover into its original position on the
respirator.
Figure 34
Figure 35