11
www.gentecaustralia.com.au
5.
To finish off the installation, fit rubber to
the stainless-steel front cover plate
6.
Push the black frame on to the stainless
box using 4 screws provided and tighten
against the wall.
7.
The stainless-steel cover plate comes with
two grub screws. Push the cover plate over
the button against the black cover seal,
then screw the two grub screw in place
to secure the stainless steel cover plate.
8.
For the TFT1016KIT only,
screw in
levers for hot and cold controls and use
Lockseal to secure. Connect hot (left)
and cold (right) water on each side of the
mixer.
•
Compliance
The mixer handle is a blender valve only
and not a thermostatic mixing valve.
Wall Installation Diagram
WALL-MOUNTED SHOWER KITS
TFT1015 KIT, TFT1016 KIT
We recommend to have the shower
mounted at 2.1 meters high. Gentec
offers two options for shower heads
fixed head and adjustable head
Do not pressurise the product
above 450kPa. If pressure testing
is done above 450kPa, excessive
pressure can damage the operation
of the timing.
*Regular service must be carried out on the product to avoid product failure.
Important note
