10
Installation Instructions
WALL-MOUNTED SHOWER KITS
TFT1015 KIT, TFT1016 KIT
Before connecting water to the valve, ensure
to flush the line and remove all debris from
the line.
All fixtures must be installed with isolation
valves and accessible.
Working pressure must be between 150 and
450kPa.
For direct ablution Temperatures will need to
be between 7ºC to 45ºC.
Wall mounting the product
1.
Mount the stainless box into the wall
firmly.
2. Screw the main valve into the box and
locate the outlet in the vertical position.
Product performs best at 350kPa.
Note:
Ensure the button on the valve body
is aligned with the water flow direction.
(Pointing to the water outlet)
3. All screwed fittings connected to the
valve must be easily dismantled so the
main valve can be removed.
It is recommended to use flat union
connections.
4. Ensure to finish the stainless steel
box flush with
the finished wall
this
includes tiles , waterproofing, etc
*Use 350Kpa pressure reduction valve for extended life and better operation
Water Inlet
Water Outlet
