Gentec Pronto-250, Руководство пользователя

Страница: 5 / 23

Pronto-250 User Manual Revision 2.2 1
1. PRONTO-250 HANDHELD LASER PROBE
1.1. INTRODUCTION
The Pronto-250 Handheld Laser Probes from Gentec-EO can measure between 0.5 and 250 W. The high
power surface absorber sensors are designed to be used at high average power densities. Pronto-250
detectors can be supplied with an optional stand and/or power supply.
For cases where the Pronto-250 detector is not calibrated at a specific wavelength, you can use your
‘’
Wavelength Correction Factor
‘’ to adjust the power you read for a particular wavelength using the self-
calibration function.
Call your nearest Gentec-EO distributor to repair and/or to recalibrate the Pronto-250. To find the nearest
Gentec-EO office or distributor in your country, refer to p.
II , Contacting Gentec Electro-Optics Inc.
1.2. WARNINGS AND DISCLAIMER
Laser power detection is completely automatic. There is no need for an external timer.
Warnings
WHEN
HOT
APPEARS ON THE SCREEN, REMOVE THE DEVICE
FROM THE BEAM IMMEDIATELY TO AVOID DAMAGING THE
SENSOR.
Be careful not to exceed the maximum levels and densities
stated in the specifications.
The handle on the Pronto-250 is for carrying purposes only. The user
must not hold the Pronto-250 during measurements. Extreme caution
must be taken during laser power measurements.
In no event shall Gentec-EO or any of its affiliates be liable for any indirect, special, incidental or
consequential injury to persons or damage to property caused by the use of any of our products, by
purchasing from Gentec-EO or any of its affiliates, you hereby indicate that you understand and agree to
the following :
Disclaimer
I am fully responsible for the safe application and use of this detector and
agreed to such by completing the sales process.
I will not use a laser device without wearing approved laser safety goggles
designed for such purpose.
I am aware and responsible of safely dealing with any back reflections.
I will not use the detector in violation of any local, state or federal law, and
I understand that it is my responsibility to know and abide by those laws
relating to the ownership and use of the detector in my jurisdiction.