Gentec Pronto-250, Руководство пользователя

Страница: 14 / 23

Pronto-250 User Manual Revision 2.2 10
3.3. MAKING A MEASUREMENT
Once all the settings are adjusted, you are ready to make a measurement. Just follow the step-by-step
instructions below.
1. Turn the device On.
2. Press the PLAY button, a sequence of dots will appear. This indicates that the device is
waiting for a laser beam to trigger the measurement.
NOTE: At any time during the measurement sequence, you can press the STOP button.
The device will stop the measurement process and go back to its initial state (displaying the last
measured value).
3. Place the device in the laser beam path. Be careful to conform to all the recommended
specifications for beam size, placement and laser power.
4. As soon as the device detects a laser beam, it will automatically start the 5 seconds countdown
for the measurement. Leave the device in the beam path for the entire countdown period, which
will be indicated on the screen.
5. Once the countdown is finished, the measurement will appear. You can remove the device from
the beam path.
6. The reading will stay on the display until the next measurement, even if you turn the device Off
and On again.
7. To make a new measurement, go back to Step 2.