Gentec-EO HP-BLU Series, Руководство пользователя, Страница: 15 / 28

HP-BLU User Manual Revision 1.0 11
4.4. LIST OF SERIAL COMMANDS FOR THE HP-BLU
The following table contains all the serial commands for the HP-BLU.
Table 5
Serial commands list
Command Command Name Description
DATA ACQUISITION
*CVU Query Current Value Gets the current power measurement in ASCII
*CAU Send Continuous Transmission
of Data Sends the power measurement in ASCII or binary to the serial
port at the rate set by the data sampling setting
*CSU Stop the CAU Command Stops the *CAU output
SETUP
*PWC Set Personal Wavelength
Correction in nm Specifies the wavelength in nm
*PWM Set Personal Wavelength
Correction in microns Specifies the wavelength in microns
*GWL Get Wavelength Returns the wavelength in nm
CONTROL
*ANE Set Anticipation Turns the anticipation algorithm on
*AND Clear anticipation Turns the anticipation algorithm off
*GAN Get Anticipation Status Returns the anticipation status
*SOU Set Zero Offset Zeroes the reading
*COU Clear Zero Offset Undoes the zeroing of the reading for a power detector
*GZO Get Zero Offset Returns the zero-offset power value
*MUL Set User Multiplier Sets the multiplier value
*GUM Get User Multiplier Returns the current multiplier value
*OFF Set User Offset Sets the offset value
*GUO Get User Offset Returns the current offset value
INSTRUMENT AND DETECTOR INFORMATION
*VER Query Version Gets firmware version of the monitor
*TMP Query Temperature Retrieves HP-BLU casing temperature
*STS Query Status Retrieves the HP-BLU status structure
*ST2 Query Extended Status Returns the extended status table
*GFW Query firmware version Return firmware identification number
All text commands must begin with a trigger character (*) and do not require a line-feed or a carriage-return.
All parameters must NOT have a space between the command and the list of parameters, nor between the
parameters themselves. The characters must be capitalised.