Gentec-E Beamage Series, Руководство пользователя

Страница: 12 / 94

Beamage Series User Manual Revision 9.0
11
1. BEAMAGE-4M
1.1. INTRODUCTION
Gentec-EO introduces the new Beamage-4M. Its sleek and thin design allows the Beamage-4M to fit
between tight optical components. Its USB 3.0 connection and improved algorithm allows very fast frame
rates. The new 4.2 MPixel CMOS sensor h
as a large 1” optical format with a small 5.5 µm pixel pitch
allowing high resolution on large beams. Most importantly the innovative and improved PC-Beamage-4M
software is simple and intuitive to any new or expert beam profiling user.
All screenshots in this manual with the words "Beamage-3.0" can be
interpreted as "Beamage-4M".
1.2. SPECIFICATIONS
The following specifications are based on a one-year calibration cycle, an operating temperature of 18 to
28°C (64 to 82 F) and a relative humidity not exceeding 80%.
Table 1-1 List of Specifications
Sensor Specification
Sensor Technology CMOS without coverglass
Sensor Size 11.3 x 11.3 mm
Sensor Area 1.28 cm
2
Pixel Count 4.2 MPixels
Pixel H x V 2048 x 2048
Optical Format 1
”
Pixel Dimension 5.5 µm
Minimum Measurable Beam 55 µm
ADC 12 bit (default) or 10 bit
Shutter Type Global
Wavelength Range 350 -1150 nm
Frame Rate
6.2 fps (4.2 MPixel Full Frame)
11.4 fps (2.1 MPixel Active Area 2048 x 1024)
18.6 fps (1.1 MPixel Active Area 2048 x 544)
32 fps (0.066 MPixel Active Area 256 x 256)
RMS noise
1000:1 (60 dB)
Minimum and Maximum
Exposure Times
0.06 to 200 ms