page 18
Genquip Gi2000 Digital Inverter Petrol Generator
Troubleshooting
Generator Won’t Produce Power
Stop the engine, then restart. If A/C lights continue to fl ash consult your dealer.
Storage
Long term storage of your machine will require some preventive procedures to guard against
deterioration.
Drain The Fuel
1. Remove the fuel tank cap. Drain the fuel tank into an approved gasoline container using
a commercially available hand siphon. Then, install the fuel tank cap.
WARNING:
Fuel is highly fl ammable and poisonous.
Wipe up any spilled fuel immediately.
2. Drain fuel from the carburettor by loosening the drain screw on the carburettor fl oat
chamber.
3. Turn the fuel cock lever to “OFF”. Start the engine and leave it run until it stops. This
will burn any remaining fuel in the carburettor.
Engine
1. Remove the spark plug, pour about one tablespoon of SAE 10W30 or 20W40 motor
oil into the spark plug hole and reinstall the spark plug. Turn over engine several times
(with ignition off) to coat the cylinder walls with oil.
2. Pull the recoil starter until you feel compression. The stop pulling. (This prevents the
cylinder and valves from rusting).
3. Clean exterior of the generator.
4. Store the generator in a dry, well- ventilated place, with the cover placed over it.
5. The generator must remain in a vertical position when stored, carried or operated.