SPRINT 11 SW
ENGLISH
Guide for the installer
Pagina 1
4. BOARD LAYOUT
Pos.
Description
Pos
Description
CN1
Inputs terminal board
OPB
OPEN B radio input memory storage push-button
CN2
Outputs and battery terminal board
RESET
RESET push-button
CN3
Power supply terminal board
PROG
Programming push-button
JP1
Quick-fit connector for travel limit device
OPA
LED for OPEN A radio input status
JP2
Quick-fit connector for receiver module
OPB
LED for OPEN B radio input status
JP3
Quick-fit connector for battery kit on board the
machine
FSW
LED for FSW input status
DP
Programming dip-switch
STOP
LED for STOP input status
POWER
Trimmer for adjusting motor power/obstacle
detection sensitivity
FCA
LED for FCA input status
F1
Protective fuse of the power supply circuit
T3.15 A 250V 5x20
FCC
LED for FCC input status
OPA
O P E N A r a d i o i n p u t m e m o r y s t o r a g e
push-button
5. CONNECTIONS AND OPERATION
5.1. JP1 CONNECTOR
The “
JP1
” connector is dedicated to the connection of the travel limit sensor at opening and closing.
The connector can be fit in one direction only, do not force it.
