SPRINT 11 SW
ENGLISH
Guide for the installer
Pagina 1
Notes on reading the instruction
Read this installation manual to the full before you begin installing the product.
The symbol
indicates notes that are important for the safety of persons and for the good condition of the automated
system.
The symbol
draws your attention to the notes on the characteristics and operation of the product.
CE DECLARATION OF CONFORMITY
Manufacturer:
GENIUS S.p.A.
Address
: Via Padre Elzi, 32 - 24050 - Grassobbio- Bergamo - ITALY
Declares that:
Control unit mod. SPRINT 11 SW
conforms to the essential safety requirements of the following EEC directives:
2006/95/EC Low Voltage directive.
2004/108/EC Electromagnetic Compatibility directive.
Additional information:
This product underwent a test in a typical uniform configuration (all products manufactured by GENIUS S.p.A.).
Grassobbio, October 22, 2009
Managing Director
D. Gianantoni
•
•
•
INDEX
1. GENERAL CHARACTERISTICS
page.13
2. TECHNICAL SPECIFICATIONS
page.13
2.1. PROTECTIVE FUSES
page.13
3. PREPARATIONS
page.13
4. BOARD LAYOUT
page.14
5. CONNECTIONS AND OPERATION
page.14
5.1. JP1 CONNECTOR
page.14
5.2. CN1 TERMINAL BOARD
page.15
5.3. CN2 TERMINAL BOARD
page.15
5.4. CN4 TERMINAL BOARD
page.16
5.5. BATTERY KIT
page.16
6. INSTALLATION OF THE RECEIVER BOARD
page.16
7. OPERATIONAL PARAMETERS
page.17
8. VIRTUAL ENCODER OPERATION
page.17
9. ADJUSTMENT OF MOTOR POWER
page.18
10. PROGRAMMING
page.18
11. MEMORY STORING THE RADIO CODE
page.19
11.1. Memory storage of 868 MHz radio controls
page.19
11.2. Memory storage of 433 MHz radio controls
page.19
11.3. Deletion of radio codes
page.20
12. CONTROL LEDS
page.20
13. POSITIONING THE TRAVEL LIMIT MAGNETS
page.20
14. FUNCTION LOGICS
page.21
