background image

ENGLISH

Genius Car Alarm

www.geniuscaralarm.com

27

Genius Car Alarm 

                                                                   

www.geniuscaralam.com                                                                     5 

 

Alarm system armed. 

The alarm system can be armed in 2 methods. 

 

1.  The first, using button I on the transmitter. It is necessary for the ignition switch to 

be OFF and for the system not to be on Valet. 

2. 

The second, using the automatic armed, which is obtained when the ignition switch 

goes from ON to OFF and then open and close a door. The system will 

automatically arm in 30 seconds after closing the last door, this functions is 

programmable (see function programming chart).

 

Alarm system armed by using the Transmitter. 

The alarm system will always be armed by using the transmitter, provided that the ignition 

switch is OFF and the system in not in the Valet mode. 

To arm the alarm system after leaving the vehicle and closing all the doors, simply press 

and let go button I on the transmitter once, the lights will flash once, the siren will sound 

once and the LED indicator on the board will start flashing slowly to confirm that the 

system in armed. If the electric locks are connected to the alarm system, they will be 

locked; the current breaker will be activated avoiding the use of the vehicle, after 3 

seconds the system goes to expecting-robbery mode 

 

Exclusion of defective zones

When the alarm system is armed and if any of the zones is defective, the siren shall sound 

3 times and, simultaneously, the lights will flash 3 times, indicating that a zone is defective, 

when this occurs, the defective zone will be automatically excluded and the vehicle will be 

protected on the rest of the zones. For example, if the trunk is not closed properly alter 

arming the alarm system using the transmitter, the siren will sound 3 times and the lights 

will flash 3 times indicating a door is not properly closed and it will exclude the sensors of 

that zone. The defective zone will be included again in the protection 3 seconds after 

correcting the failure, alter properly closing the trunk. 

 

Armed and activated alarm system

When the alarm system is armed, the LED indicator on the board blinks slowly, if a door is 

opened, the siren starts sounding and the lights flashing for 60 seconds, if the door 

remains open after the 60 seconds, the siren will keep sounding and the lights flashing for 

3 minutes, after the 3 minutes, the alarm system excludes the door sensors protecting the 

vehicle through the rest of the sensors, if the door is closed before the first 60 seconds 

after the siren start sounding, the same will silent after 60 seconds and the light will stop 

flashing.  

If when the alarm system disarms the siren sounds 4 times and the lights flashes 4 times, 

this indicates the vehicle was victim of a carjack attempt. The LED indicator on the board 

will continue to blink until the ignition switch is ON. Please check the vehicle.  

 

Alarm System Disarm

 

When the alarm system is armed, press and let go button No. II on the transmitter, the 

siren will sound twice and the lights will flash twice indicating the alarm system disarmed, 

the  current breaker will deactivate, the LED indicator on the board will turn off, if the 

electric locks are connected, they will open, if button II is pressed again, the system will 

send the second pulse to open the electric locks 

 

Silent Arm 

First press and let go button III and then press and let go button I on the transmitter to arm 

the alarm system silently, the alarm system will arm without the sound of the siren. When 

the alarm is silently armed and a door is open or not properly closed, the siren will sound 3 

times as an alert warning. 

 

Содержание G24 Si

















Отзывы: