background image

ENGLISH

Genius Car Alarm

www.geniuscaralarm.com

24

Genius Car Alarm 

2                                                                           www.geniuscaralam.com  

 

CAR ALARM GENIUS – Series 2B  

4 Buttons - G24 Si  

(Internal Shock Sensor)

 

 

  Module controlled using Micro-Processor 

  2 Transmitters - 4 buttons with color Blue LED 

  4 Learning Transmitters (Codes) 

  Transmission frequency 370 MHz (Anti-Scanner)  

  Panic by transmitter 

  Car Finder by transmitter  

  Transmitter Arm and Disarm Mute 

  Programmable Mute Armed and Disarmed 

  Negative output Channel 2 (Opens electric trunk) 

  Negative output Channel 3 optional modules (Programmable) 

  Opening the electric trunk without deactivating the alarm using the transmitter 

(channel 2) 

  LED indicator on the board 

  Programmed controls identifier (P.C.I.) (Programmable) 

  1 Positive output for Light flash with internal relay in the module 

  Central Door Lock on Negative 

  Automatic Armed (Programmable)  

  Electric locks on with the Automatic Armed (Programmable) 

  Ignition Lock and unlock (Programmable) 

  Double push button to unlock door 

  Automatic Rearm (accidental disarm) 

  Automatic Rearm with Lock 

  Shock Sensor bypass by transmitter 

  Line door pin switches (Positive or Negative)  

  Line hood and trunk pin switches (Negative) 

  Electronic siren of 120 dba 

  Mode Valet (using emergency button or Transmitters ) 

  Wires identified by colors 

  Protection fuses included in the installation harness 

  Transmitter Anti-carjack (Programmable) 

  Door Anti-carjack (Optional) 

  Ignition Anti-carjack  (Programmable) 

  Presence Anti-carjack (Additional transmitter) (Programmable) 

  Warning Light when anti-carjack activates 

  Acoustic warning when anti-carjack activates (Programmable) 

  Negative output in armed, for engine cut 

  Second engine cut (Programmable) 

  Negative output timed for windows-up modules (Programmable) 

  Defective zone exclusion 

  Flashing output for the horn (Programmable) 

  Dome Light (Programmable)  

  Function programming through software 

  Manual disarmed by safety PIN code (Programmable)  

  Memory of last status of the system. 

Содержание G24 Si

















Отзывы: