background image

ENGLISH

Genius Car Alarm

www.geniuscaralarm.com

38

Genius Car Alarm 

16                                                                           www.geniuscaralam.com  

 

 

LIMITED WARRANTY  

 

Every GENIUS branded alarm system is guaranteed for (   ) year(s) since the installation 

date considering the following conditions:  

 

1.  This warranty does not cover damage or malfunctions caused by:  

a.  Immersion in water or liquids 

b.  Shocks or fire 

c.

 

Attempted modification or repair by unskilled hands

 

d.  Controls’ Loss or Degradation 

 

2.  The costs of dismantling, assembling or any other will be borne by the claimant.

 

 

3. The implementation of this guarantee will have greater flexibility in its dealings, if the 

user has placed the sticker on the rear window of the vehicle.

 

 

4. The technical department of the company reserves the right to determine the validity 

of the guarantee according to expertise.  

 

WARNING: The Anti-hijacking is exclusively a deterrent against possible theft. In no case 

it can be considered as an insurance against theft. The manufacturer disclaims all liability 

for damage or abnormal functioning of the alarm, accessories and automotive group, due 

to improper installation or monitoring of the characteristics listed.  

 

Recommendations for Storage  

Take it with you always 

 

1. Anti-hijacking Disarming

 

With the ignition key in ON position, press the reset button 1 time, wait 3 seconds and the 

anti-hijacking mode will be disarmed.  

 

2

Manual Disarming 

 

Turn the ignition key to ON position, press the reset button 1 time, wait 3 seconds and the 

alarm’s system will be disarmed.  

 

3. Enter and Exit Valet Mode 

With the ignition key in ON position, press and hold reset button for 5 seconds, the LED will 

light solid; to exit Valet mode, with the ignition key in ON position, press and release reset 

button, the LED will turn off.  

Important

: Plastic and store these instructions and take it with you always. 

 

 

Technical Specification 

(1)  Frequency 

370 MHz 

(2)  Working Voltage 

|From 9.5V to 

16V 

(3)  Standby Current for ARM Mode 

13mA 

(4)  Standby Current for DISARM Mode 

11mA 

(5)  Maximum Parking Light Output 

15A 

(6)  Maximum Negative Output for Trunk, Dome Light, 3

rd

 Channel  

Negative 0.5A 

(7)  Maximum Central Door Lock Output 

Negative 0.5A 

(8)  Combination of Fixed code in Transmitter 

1,0480576 

 

Содержание G24 Si

















Отзывы: