English
-24-
PLAYBACK MODE
Playing Back Still Images / Video Clips
You can playback the still images on an LCD monitor.
1.
Turn on your digital video camera.
2. Toggle
the
MODE
button to go to [SELECT
MODE].
3.
Select [IMAGE/MOVIE] with the zoom lever and
press the
button.
The last image/video clip appears on the LCD
monitor.
4.
Select the desired images with the zoom lever.
To view the previous image, slide the zoom lever to the
T
side.
To view the next image, slide the zoom lever to the
W
side.
To start playing back the video clips, follow the steps 1-4 above, then press
the
button.
A press of the
/
buttons during playback allows fast forward play /
fast reverse play. To pause video playback, press the
button; to cancel
pause, press the
button again.
To stop video playback, press the
button. This stops playback and
returns to the start of the video clip.
NOTE
•
If the video cannot playback in WMP 9.0, please update WMP 9.0 from the Microsoft
website.
•
To adjust the sound level, sliding the zoom lever to the
T
side will increase the volume,
sliding the zoom lever to the
W
side will decrease the volume.
Playing Back Still Images/Video Clips on TV
You can also playback your images on a TV
screen. Before connecting to any devices,
make sure to select NTSC / PAL system to
match the video output system of the video
equipment you are going to connect to the
digital video camera, then turn all connected
devices off.
1.
Connect one end of the A/V OUT cable to
the A/V OUT terminal of the digital video
camera.
VT
