Genius KYE Systems VideoWalker DVB-T USB, Руководство пользователя

Страница: 6 / 14

English
4. System setup
4.1 To watch digital terrestrial TV, you need to configure several functions.The
necessary sections for system setting will be described in advance and unnecessary
parts at the last.
To enter the configuration page please click at the icon on the VideoWalker
DVB-T USB control panel.
4.2 DTT (Digital Terrestrial TV) – Setup
There are three ways to scan Digital TV Programs, please choose one of them to
setup when you power on VideoWalker DVB-T USB for the first time.(It is highly
recommended to use the first one to scan TV programs if you do not know the
frequency of TV channels). There are three different kinds of bandwidth of digital
transferring frequencies (6/7/8 MHz) in the world. The frequency of 6MHz is used in
Taiwan, the frequency of 7MHz is used in Austria, and the frequency of 8MHz is used
in European countries. This can make sure you can access TV programs after
scanning. It will take a few minutes for the first time scanning.
I. Searching for TV channels by Scanning Country/Area: If you do not know the
frequency of the TV channels, you can choose to scan country for the TV channels.
Step1
：
Please click at “ Scan by Country/Area ”.
Step2
：
Please select your “ Country ”.
Step3
：
Select your “ Area ”
Step4
：
Click at “ Apply ”.
Step5
：
Click at “ Scan ”
Note
：
If you can’t find the “ Country ” and “ Area ” of yours,
please select “ ALL-Universal ” in the field of “ Country ”
and “ Full Search (6/7/8MHz) ” in the field of “Area”.
II. Searching for TV channels by scanning a signal channel(frequency): If you
know the frequency of TV Channel, you can enter the frequency in the blank directly
to search for TV channels.
Step1
：
Please click at “ Scan by single channel
(frequency)”.
Step2
：
Please enter the frequency you would like to scan into
“ Frequency Start” . (Please check the correct Frequency in
your local area to make sure the signal is detective.)
Step3
：
Also select the bandwidth of
the channel. (There are 6MHz /7MHz / 8MHz bandwidth)
supported, if you are not sure of the correct one, please
choose “ auto ” for it.)
Step4
：
Click at “ Apply ”
Step5
：
Click at “ Scan