English
VideoWalker DVB-T USB and test again.
To update the latest Country/Area channel list, please click on the hyper link on
the control panel and select “Update terrestrial list”.
7.
When video plays but Audio fails?
Please check the sound card or the volume setting.
8.
When failed to play program?
Make sure you have installed Sound Card Driver and the Sound Card is working.
Please note that no matter if you want to listen to the audio or not, the sound
card and its driver must be installed.
Please check the signal quality and strength.
9.
When playing the programs, audio is ok, but screen is blank. Why?
Please make sure your VGA driver and Microsoft DirectX8.1 were installed
correctly.
10. Why is the MPEG2 video not smooth when you playback on Notebook or
PC?
MPEG2 video playback consumes lots of CPU power. To get better performance,
please make sure "Power-saving" mode of the Notebook PC is disabled and the
CPU is running at it's maximum frequency.
11. Why does the error message show "Can't create the capture process"?
The installation of VideoWalker DVB-T USB could be messed up. Please
un-install VideoWalker DVB-T USB, then install it again.
12. Remote controller "POWER" key cannot launch VideoWalker DVB-T USB?
The remote controller's "POWER" key for VideoWalker DVB-T USB can only
"power off" the application, but not "power on". It's a hardware limitation.
13. The Remote controller does not work. VideoWalker DVB-T USB does not
react to the key presses?
VideoWalker DVB-T USB window must be the “focus” window to receive the
remote controller input. You may click on the caption of VideoWalker DVB-T
USB window, and then try again.
