Genie ZX-135/70 with Jib-Extend, Руководство оператора

Страница: 36 / 82

Operator's Manual Second Edition • Third Printing
Controls
34 ZX
®
-135/70 Part No. 1272822GT
19 Steer mode select switch with indicator lights
Move the steer
mode select switch
to choose steer
mode.
The indicator light
next to the current
steer mode will be
on.
20 Single axis proportional control handle for
secondary boom up/extend and down/retract
function
Move the control handle
up and the secondary
boom will raise and then
extend. Move the control
handle down and the
secondary boom will
retract and then lower.
21 Drive select switch with indicator lights
Move the drive select
switch to choose drive
setting. The indicator
light next to the current
setting will be on.
22 Thumb rocker for jib boom extend/retract
function
Push the top of the rocker
switch and the jib boom will
retract. Push the bottom of the
rocker switch and the jib boom
will extend.
23 Dual axis proportional control handle for jib
boom up/down and platform rotate left/right
functions
Move the control handle
up and the jib boom will
raise. Move the control
handle down and the jib
boom will lower. Move
the control handle to the
left and the platform will
rotate to the left. Move
the control handle to the
right and the platform will
rotate to the right.
24 Axle extend/retract switch with indicator lights
Move the axle select
switch to choose an axle
setting. The indicator
light will flash while the
axles are extending and
stay on when the axles
are fully extended. The
indicator light will flash
while the axles are
retracting and stay on
when the axles are fully
retracted.
25 Drive enable switch with indicator light
Light on indicates that the primary boom has
moved past either circle-end wheel and the
drive function is turned off. To drive, move the
drive enable switch and slowly move the drive
control handle off center.