Genie ZX-135/70 with Jib-Extend, Руководство оператора

Страница: 75 / 82

Second Edition • Third Printing Operator's Manual
Transport and Lifting Instructions
Part No. 1272822GT ZX
®
-135/70 73
Observe and Obey:

Only qualified riggers should rig the machine.

Only certified crane operators should lift the
machine and only in accordance with the
applicable crane regulations.

Be sure the crane capacity, loading surfaces
and straps or lines are sufficient to withstand
the machine weight. See the serial label for the
machine weight.
Lifting Instructions
Fully lower and retract the boom. Fully lower the jib.
Remove all loose items on the machine.
Determine the center of gravity of your machine
using the table and the picture on this page.
Attach the rigging only to the designated lifting
points on the machine. There are four lifting points
on the chassis.
Adjust the rigging to prevent damage to the
machine and to keep the machine level.
Center of gravity X Axis Y Axis
ZX-135/70
44 in
1.12 m
59 in
1.5 m
1 X Axis
2 Y Axis