•
Vandal Resistant IR Bullet Camera
19
Adjusting the Monitoring Direction
1. Before tightening the locking ring you can rotate the whole Camera Body to the required surveillance
position.
2. Loosen the bracket screw and you can rotate the Camera Body horizontally according to your surveil-
lance need. Tighten the bracket screw after you finish the adjustment.
3. Loosen the side screw and you can rotate the camera body vertically, according to surveillance need.
Tighten the side screw after you finish the adjustment.
Changing Camera Functions
Loosen the bottom cover screw to open the bottom cover.
1. Use the video out port for connecting a test monitor to the camera to locally check the image output.
2. Set the required functions using the OSD setup.
3. Rotate the IR Illumination adjustment to adjust the IR intensity; appropriate to the application.
4. Adjust the focal length with the lens zoom and focus levers to obtain the correct field of view. Once a
clear and focused image is achieved, fully tighten the thumb screws.
5. After all adjustments are completed lock and tighten the bottom cover using the bottom cover screw.
