•
Vandal Resistant IR Bullet Camera
18
Installation
Before Installation
•
Read the cautions before installation:
1. Make sure the installation location can support 5 times the total weight of the bullet camera.
2. Make sure the cable doesn’t get jammed inappropriately or allow the cable insulation to get damaged
during installation. This may result in a malfunction or a fire hazard.
3. Make sure that nobody is beneath the installation location.
Installing the Camera
The installation process is described below:
Step 1
Place the dielectric paper on the wall / ceiling (this is to protect the camera from damage by conducted
currents). Then, fix the camera base to the wall/ceiling with the three screws provided.
*Pay attention to the cable trough. Point it in the direction of the power supply if cables exit there.
Step 2
Attach the camera body to the fixing base.
Step 3
Fasten the camera body tightly using the gearing on the locking ring. The installation is complete.
•
Cable Trough
Cautions for Installation:
1. Allow the cable to pass through the hole in the middle before mounting the camera to the base.
•
2. If passing through the side, the cable must be put in the cable trough first before the camera is
mounted.
