•
Vandal Resistant IR Bullet Camera
14
Adjusting the Monitoring Direction
The W70MBIR has a 3-axis gimbal design.
Loosen the holder, bracket and connector screws, then adjust the camera to the appropriate monitoring
position. After one direction is set, tighten the relevant fixing screw. Fully tighten all screws when all
adjustments are completed.
Changing Camera Functions
Loosen the bottom cover screw to open the bottom cover.
1. Use the video out port for connecting a test monitor to the camera to locally check the image output.
2. Set the required functions using the OSD setup.
3. Rotate the IR Illumination adjustment to adjust the IR intensity; appropriate to the application.
4. Adjust the focal length with the lens zoom and focus levers to obtain the correct field of view. Once a
clear and focused image is achieved, fully tighten the thumb screws.
5. After all adjustments are completed lock and tighten the bottom cover using the bottom cover screw.
•
Connector Screw
•
Holder Screw
•
Bracket Screw
