•
Vandal Resistant IR Bullet Camera
12
•
Connector Screw
•
Lens Zoom Cover
•
OSD Setup
•
Video Out Port
•
Lens Focus Lever
•
Holder Screw
Operating Instructions
Connection
1. Connect one end of the BNC Cable to the terminals of a monitor or recording device.
2. Connect the other end of the BNC Cable to the camera VIDEO OUT terminal.
•
3. Then, plug the power adapter into the power receptacle. The image will be displayed when the monitor
is on.
10. Holder Screw
•
Adjusts and sets the monitoring direction
11. Connector Screw
•
Adjusts and sets the monitoring direction
12. Lens Zoom Lever
•
Adjusts the zoom ratio of the Lens
13. Lens Focus Lever
•
Adjusts the focal length of the Lens
14. OSD Setup
•
Sets the available OSD functions
15. Video Out Port
•
Test Monitor connector for checking the image locally
12
13
14
15
11
10
