Part No. 133554
Genie TZ-34/20
35
Operator’s Manual
Fourth Edition • Fourth Printing
Manual Operation of Functions
All boom functions can be operated with the hand
pump located on top of the power unit cover.
Manifold valves are located under the manifold
cover on the ground controls side of the machine.
There are three locked positions on each manifold
valve. The center locked position is for normal
machine operation.
1 Locate the valve for the desired function. Push
the thumbscrew and turn to release.
2 Set the valve to perform the desired action.
Make sure to turn the thumbscrew until it locks
in place.
Turntable rotate
Clockwise: Pull the
thumbscrew all the way
out and turn.
Counterclockwise: Push
the thumbscrew all the
way in and turn.
Turntable rotate brake
Note: Rotation brake is
located under opposite
side cover.
Disengage: Rotate
counterclockwise and
pull out until the button
pops into place.
Engage: Push in and
rotate clockwise until the
button pops into place.
3
For ANSI and CSA models only -
Operate the hand pump.
For CE models only -
Break the security tie and operate the hand
pump.
Note: If the sercurity tie is broken or missing
consult the appropriate Genie Service Manual.
4 Push in and rotate clockwise to engage the
rotate brake for normal machine operation.
Note: The machine will not operate unless the
valves are properly reset.
Primary boom
Retract: Push the
thumbscrew all the way in
and turn.
Extend: Pull the
thumbscrew all the way
out and turn.
Down: Push the
thumbscrew all the way in
and turn.
Up: Pull the thumbscrew
all the way out and turn.
Secondary boom
Down: Push the
thumbscrew all the way in
and turn.
Up: Pull the thumbscrew
all the way out and turn.
5
For ANSI and CSA models only -
Operate the hand pump.
For CE models only -
Break the security tie and operate the hand
pump.
Note: If the sercurity tie is broken or missing
consult the appropriate Genie Service Manual.
6 Turn the thumbscrew to release.
7 Push the thumbscrew halfway in and turn
clockwise to lock into position for normal
machine operation.
Note: The machine will not operate unless the
valves are properly reset.
Turntable rotate
Operating Instructions
Turntable rotate
brake valve
Turntable rotate
Secondary boom
up/down
Primary boom
up/down
Primary boom
extend/retract
Normal operating
position (halfway in)
Thumbscrew
all the way in
Thumbscrew
all the way out
