14
MOTION SENSOR ENABLE/DISABLE
(for units so equipped).
NOTE: After learning the Console to a Network Adapter,
you can disable or enable that opener’s
Motion Detector
by pressing and holding it’s Work Light button for
10 seconds. Release the button and the Work Lights will
flash twice confirming the desired action.
•
On older units , the Work Lights will not flash to confirm the
action, although the lights will be disabled or enabled.
DISPLAY FORCE
1 Pressing the SELECT button to choose
“GET FORCE” will present the choices:
Pressing either SCROLL
button will cycle between
the following choices:
Pressing SELECT to
choose will display the
current force level. Adjusting the force is
covered in your owner’s manual.
1 Pressing the SELECT button will present the
following sub-menu.
2
Opener 1, 2 or 3. SCROLL
to the desired opener. &
press SELECT.
“PLEASE WAIT” and return
to the “SETTINGS” menu.
REMOVING OPENER FROM IWC
1 Pressing the SELECT button to choose
“REMOVE OPENER” will present the display:
NOTE: To return the light to operation, you must
“REMOVE OPENER” (page 13) and then re-learn
the opener (page 8).
2.5
2.6
REMOVE LIGHT
3
2
Press SELECT to complete
removal of the opener.
