Page
C - 11
Document 57.0008.7200 - 05/2007
Handler with telescopic boom
GTH-3512
OPERATING INSTRUCTIONS
■
C-3.2.7 Road/Jobsite switch -
Switch
has two positions:
1
The switch is on and the jobsite mode
is enabled.
2
The switch is off and the machine is
set to road transfer mode.
Each pressure switches the selector from the Road
position to the Jobsite position.
In
Jobsite
mode:
•
all the machine functions are enabled.
In
Road
transfer mode:
•
the boom movement is disabled
•
only the two-wheel steering mode is enabled.
ATTENTION
Switch from the Road position to the Jobsite
position only when the machine stands still and the
wheels are straight in order not to lose proper
shafting alignment. If the wheels must be aligned,
consult chapter
D.3-13 Shafting alignment
in the
Maintenance section.
■
C-3.2.8
Mechanical gearbox controls
Mechanical gearbox pushbutton
For changing between 1
st
and 2
nd
gear.
Push the button to select the
required speed.
Each pressure corresponds to the
selection of a new speed and the light
under the glass corresponding to the
selected speed lights up.
ATTENTION
Do not change mechanical gear when the machine
is running.
IMPORTANT
When a gear is not correctly put, the warning light
8.10 comes on (
see C-3.3.2
).
■
C-3.2.6
Steering mode selection
Steering mode switch
Three-position switch for the selection
of the steering mode:
1
Crab steering
0
Two-wheel steering
2
Four-wheel steering
11
29
13
1
0
2
Содержание GTH-3512
Страница 2: ...Courtesy of Crane Market...
