Genie GS-2646 AV, Руководство оператора

Страница: 30 / 57

Operator's Manual Second Edition • Second Printing
Inspections
28 GS-2646 AV • GS-2646 AV35 Part No. 1274894GT
Test Emergency Lowering
15 Activate the up function by pressing the lift
enable button and platform up button, and
raise the platform approximately 2 ft. / 60 cm.
16 Pull the emergency lowering knob located on
the ground controls side of the machine, at the
steer end.
Result: The platform should lower. The
descent alarm will not sound.
17 Turn the selector switch to platform control.
At the Platform Controls
Test Emergency Stop
18 Push in the platform red Emergency Stop
button to the off position.
Result: No functions should operate.
Test the Horn
19 Pull out the red Emergency Stop button to the
on position.
20 Press the horn button.
Result: The horn should sound.
Test the Function Enable Switch and the
Up/Down Functions
21 Do not hold the function enable switch on the
control handle.
22 Slowly move the control handle in the direction
indicated by the blue arrow, then in the
direction indicated by the yellow arrow.
Result: No functions should operate.
23 Press the lift function button.
24 Wait seven seconds for the lift function to time
out.
25 Slowly move the control handle in the direction
indicated by the blue arrow, then in the
direction indicated by the yellow arrow.
Result: The lift function should not operate.
26 Press the lift function button.
27 Press and hold the function enable switch on
the control handle. Slowly move the control
handle in the direction indicated by the blue
arrow.
Result: The platform should raise.
28 Release the control handle.
Result: The platform should stop raising.
29 Press and hold the function enable switch on
the control handle. Slowly move the control
handle in the direction indicated by the yellow
arrow.
Result: The platform should lower. The
descent alarm should sound while the platform
is lowering.