Genie GS-2646 AV Скачать руководство пользователя страница 28 | Manualshive

Страница: 28 / 57

Genie GS-2646 AV Скачать руководство пользователя страница 28

Operator's Manual

Second Edition • Second Printing

Inspections

26

GS-2646 AV • GS-2646 AV35

Part No. 1274894GT

Do Not Operate Unless:



You learn and practice the principles of safe
machine operation contained in this operator’s
manual.

1 Avoid

hazardous

situations.

2 Always perform a pre-operation inspection.

3 Always perform function tests prior to

use.

Know and understand the function tests
before going on to the next section.

4 Inspect the workplace.

5 Only use the machine as it was intended.

Function Test Fundamentals

The function tests are designed to discover any
malfunctions before the machine is put into service.
The operator must follow the step-by-step
instructions to test all machine functions.

A malfunctioning machine must never be used. If
malfunctions are discovered, the machine must be
tagged and removed from service. Repairs to the
machine may only be made by a qualified service
technician, according to the manufacturer’s
specifications.

After repairs are completed, the operator must
perform a pre-operation inspection and function
tests again before putting the machine into service.

«
...
26
27
28
29
30
...
»

Содержание GS-2646 AV


























































Отзывы:

Нет отзывов