73
Software Version:
Current firmware version.
MAC Address:
Display the MAC address of the camera.
Maintenance
System Restart
Pressing the
Reboot Server
button causes the system to reboot. Do not press the Reboot
button unless the server needs a reboot.
Factory Default
Reset all settings to factory default values. System log and user registrations are also cleared.
Save Config to PC
All the configuration settings are stored.
Load Config from PC
Stored configuration can be browsed, and restored. The server is rebooted once the
Config
Restore
button is pressed.
Firmware Upgrade
Press the
Browse
button to select a firmware file from PC.
Press the
Firmware Upgrade
button to start to upgrade.
Messages showing status (downloading/upgrading) are displayed.
The camera will reboot automatically after completing the upgrade.
Do not turn the camera
off during upgrading
8. Network Access Using the Web-Browser Viewer
The EZPZ NVR provides a live remote monitoring feature via a web-browser viewer (Note: Web-Brower is
only available for Internet Explorer 10).
1. Check the IP address of the EZPZ NVR from SETUP>SYSTEM>DESCRIPTION>IP ADDRESS.
2. Input the IP address or Domain name address that you pre-registered on www.bestddns.com on the
address field and press “Go”.
Please pre-register on www.okddns.com in Korea and on www.ddnscenter.com in USA.