16
The following IP Camera settings are recommended for optimum connection to the EZPZ NVR
Setup Items
Default
Description
Network Type
DHCP
The IP Camera must act as a DHCP client for the “Plug and Play”.
Encoding Type
CBR
CBR is recommended - because of the internal buffer strategy of the EZPZ NVR.
Dual Streaming
General
Sub Stream must be turned ON.
The compression, for both the Main and Sub Stream, must be
H.264
.
Main
1920 x1080@30fps,
5Mbps
(Max. throughput of the NVR is
20Mbps
)
Sub
D1@30fps, 1Mbps
Audio
G.711
Only the
G.711
Codec is supported
•
The EZPZ Series features a "Plug and Play" function with a PoE Switch.
•
The “Plug and Play” functionality requires the IP Camera to be in DHCP mode.
•
The NVR automatically assigns an IP Address to the IP Camera (192.168.78.11 ~ 254).
•
The EZPZ NVR automatically maps a camera on the PoE Port to the corresponding NVR channel
number.
NOTE:
With the EZPZ IP Kit,
DO NOT USE
a router connection to connect an IP Camera. The NVR will not be
able to find the camera, or connect to it. The LAN Port can be connected to a router, but not the PoE Ports.
Clients