39
NETWORK TYPE
DHCP
: EZPZ
NVR automatically retrieves an IP address.
STATIC
: Network information must be manually configured.
IP
Enter the IP address assigned for the EZPZ NVR
SUBNET MASK
Enter the Subnet Mask assigned for the EZPZ NVR
GATEWAY
Enter the Gateway assigned for the EZPZ NVR.
DNS (PRIMARY)
Enter the Primary DNS address assigned for the EZPZ NVR
DNS (SECONDARY)
Enter the Secondary DNS address assigned for the EZPZ NVR
DDNS
Dynamic Domain Name System (DDNS) allows a DNS name to be
constantly synchronised with a dynamic IP address. In other words, it
allows a dynamic IP address to be associated with a static domain name
so others can connect to it by the static name.
Enable/disable using domain name address through DDNS server.
DDNS 1
: Select one type from among the following three DDNS servers.
DDNS 2
: Select this type when you want to use another general-purpose
DDNS Server.
DDNS INTERVAL
: Set the connection interval (5-60minutes).
4-9-1. Network Port and Web Port
Connecting the EZPZ NVR through a common IP sharing device, each NVR must be assigned a unique
TCP port number for access from outside the LAN.
This port number is displayed on
NETWORK>NETWORK PORT Setup MENU.
NOTE:
If you access the NVR from only within the same LAN, the TCP port number doesn’t
need to be changed.
To access the EZPZ NVR beyond a router (firewall), you must open the correct TCP ports for live/playback
streaming, commands, remote backup and audio streaming. If these ports are not opened properly, you
can’t access the NVR beyond a router.
o
For live/playback streaming, commands and for remote backup
: Open the port number
on NETWORK>NETWORK PORT menu. The default port number is 5445.
o
For bi-directional audio:
Open the port number on NETWORK AUDIO PORT. The default
port number is [NETWORK PORT 1].
o
For web-viewer downloading and remote firmware upgrading
: Open the port number on
NETWORK>WEB PORT menu. The default port number is 80.
4-9-2. Network Types
4-9-2-1. DHCP
An IP address is assigned by the DHCP server, which automatically assigns the IP address and other
parameters to new devices.
4-9-2-2. STATIC
IP address, Subnet Mask, Gateway, and DNS are manually assigned by the user.