Car2U
®
System Programming for Genie Models
Programming Car2U to a Genie Opener
1.
Press and release the learn code button the red LED will begin to blink.
2.
Press the desired Car2U button one time. The red LED will stop blinking and stay
on.
3.
Press the desired Car2U button one more time. The red LED will go out.
4.
Pressing the Car2U button again will cause the garage door to move.
NOTE: If you cannot find your program button on the power head, see the user manual
or visit the Genie website for additional assistance.
ChainLift
®
, BeltLift
®,
ReliaG
®
600, ReliaG
®
800
CODE
6
