Car2U
®
System Programming for Genie
®
Setting the Car2U to Factory Default settings
The default setting for the Car2U system is:
•
Button 1= Genie Manufactured Openers
•
Button 2= LiftMaster
®
Manufactured Openers
•
Button 3=Wayne Dalton
®
Manufactured Openers
1.
Press and hold buttons 1 and 3 for twenty seconds or until all three LED’s begin to
flash.
2.
Release both buttons. The Car2U system is now set to the Factory Default
settings.
1
2
3
Changing a button to Genie
1.
Press and hold buttons 1 and 3 for one second and release– all three LED’s will
light solid RED.
2.
Press and hold the button (2 or 3) you want to change to Genie – the corresponding
LED will flash. While continuing to hold the button you want to change, press and
release button 1. Press and release button 1 again.
3.
Release the button you were holding in step B and wait for the LED to stop flashing.
This button is now set for Genie.
Note: Repeat this procedure for the remaining button to change to Genie
1
