Car2U
®
System Programming for Genie Models
Programming Car2U to a Genie Opener
1.
Press and hold the program button until the round blue LED is on – release
the button. The long LED will flash purple.
2.
Press the desired Car2U button for one second and release. Press that same
button again for one second and release. The round LED and long LED will
both turn blue and then turn off.
3.
Pressing the Car2U button again will cause the garage door to move.
NOTE: If you cannot find your program button on the power head, see the user manual
or visit the Genie website for additional assistance.
PRGM
IntelliG
®
1000, IntelliG
®
1200, TriloG
™
1200,
TriloG
™
1500, GPower
™
900
Manufactured after November 2011
2
