Car2U
®
System Programming for GENIE Models
Programming Car2U to a Genie Opener
1.
Press and hold the program button until the round blue LED and the long
blue LED are on – release the button. The round blue LED will be on.
2.
Press the program button once - the long purple LED will begin flashing
3.
Press a previously learned Intellicode
®
2 transmitter button
from model G3T (pictured right) one time. Both the long and round
LEDs flash purple.
4.
Press the desired Car2U button for one second and release. Both the long and
round LEDs go solid purple.
5.
Press the desired Car2U button (again) for one second and release. Both the long
and round LEDs change from solid purple to solid blue and then go out.
6.
Pressing the Car2U button again will cause the garage door to move.
NOTE: If you cannot find your program button on the power head, see the user manual
or visit the Genie website for additional assistance.
PRGM
IntelliG™ 1000, IntelliG™ 1200, TriloG™ 1200,
TriloG™ 1500, GPower™ 900
Manufactured before July 2011 Learn Window
PRGM
4
