ⓒ
2020
LaON
Technology Co., Ltd. All rights reserved.
46
The Talk key and GENIE group channel button
Group channel Button (#2)
Press the group channel (#2) button on the front panel and select the GENIE group channel. The GENIE group
channel will be changed from 1 to 5, and to A (All) by each pressing. The group channel 1 will come again after
A (All). Every time you press and release the group channel button, a voice message ‘group one to five or all’ will
be heard from the headset. Selected GENIE group channel is displayed on the Normal menu.
Note:
The GENIE group channels available on the Base Station can be specified in the Set Group menu.
If the same GENIE group channel as the Base Station is set to a 4-wire or AUX IO group channel, it is possible
to communicate with the connected intercom devices.
Talk key (#1)
The Talk key is operated Momentary/Latching, Momentary is the audio path is open while the button is pressed,
Latching opens the audio path when the button is quickly tapped, and the second tab will release it.
Talk LED
When the Base Station is transmitting, the LED on top of the Talk key is lit solid green. When the Base Station is
ready but not transmitting, that is listen only status, the LED on top of the Talk key flashes green.
The AUX and AUX group channel buttons
AUX button (#5)
You can select three options - auxiliary Input (AUX In) only or auxiliary Input and Output (AUX I/O) or no use of
auxiliary device. Each mode is set by pressing AUX button sequentially. When auxiliary input is selected, AUX In
LED on top of the AUX button will be on. When you use the auxiliary input and the auxiliary output devices at the
same time, select AUX I/O. When AUX I/O is selected, AUX I/O LED on top of the AUX button will be on. When
both are not activated, the LEDs of AUX In and AUX I/O on top of the AUX button will be off.
AUX group channel button (#6)
Press AUX group (#6) button on the front panel and select the GENIE group channel for the auxiliary device.
The GENIE group channel will be changed from 1 to 5, and ‘A’ (All) by each pressing. The group channel 1 will
come again after ‘A’ (All). Selected AUX group channel is displayed on the Normal menu.
Note:
The GENIE group channels available on the Base Station can be specified in the Set Group menu.
The 4-wire AND 4-wire group channel buttons
4-wire button (#3)
The 4W button allows for enabling or disenabling the connection for the 4-wire device. Two modes will be toggled
by pressing 4W button. The LED on the top of the 4W button is lit when the connection is selected.
4-wire group channel button (#4)
Press the 4-wire group button (#4) on the front panel and select the GENIE group channel for the 4-wire device.
The GENIE group channel will be changed from 1 to 5, and ‘A’ (All) by each pressing. The group channel 1 will
come again after ‘A’ (All). Selected 4-wire group channel is displayed on the Normal menu.
Note:
The GENIE group channels available on the Base Station can be specified in the Set Group menu.
Lock the Menu
Press the Right button for 3 seconds to lock or unlock the menu.
Press the Right button for more than 3 seconds and the Base Station buttons are locked. In Lock mode, 'Lock' is
displayed on the screen. Lock mode does not turn off when power is turned back on, and the lock status remains.
Press the Right button again for more than 3 seconds to release.
Network status LEDs on the front panel
RF Alert LED (#7)
When there are audio breakups seriously, RF Alert LED will go on.
RA Link LED (#8)
This green LED indicates that a data connection has been established with the Remote Antenna.
RA Active LED (#9)
This flashing LED indicates that the Base Station is receiving data from the Remote Antenna.
Menu menu
Press Set under the Normal menu, and the Main menu appears, as shown in Figure. Move to and press Set to
select each menu item. Select Quit or press Set for 2 seconds on any item to return to the Normal menu.
Set Gains menu
When you select the Set Gain menu, the menus appears as below. You can adjust volume level of the headset
and external speaker by selecting Speaker. You can adjust each level by selecting each of the following menu
items: Mic (headset microphone), Sidetone, AUX In (auxiliary input), AUX Out (auxiliary output), 4WSND (4-wire
Figure. Main menu
SetGains ScrSave
RMK RA
PairBelt SetBase
Multi-BS
Quit