ⓒ
2020
LaON
Technology Co., Ltd. All rights reserved.
35
Menu controls
Normal menu
The labels and listen levels of the eight Talk channels are displayed on two screens. You can set when the screen
automatically turns off. The display will turn off if key is not used or there is no incoming call during a set time period. If there
is any operation of the key, the display will turn on again. The listen level of each Talk channel is controlled by each Rotary
control, with each Talk path is created by pressing each Talk key.
First screen (
Front panel left screen):
1
: Label of the Talk channel 1
2
: Listen level of the Talk channel 1
3
: Label of the Talk channel 3
4
: Listen level of the Talk channel 3
5
: Label of the Talk channel 2
6
: Listen level of the Talk channel 2
7
: Label of the Talk channel 4
8
: Listen level of the Talk channel 4
Turn to increase or decrease the listen level for each Talk channel.
Second screen (
Front panel right screen):
In the same way, it represents Talk channels 5 through 8.
Main menu
You enter Main menu by pressing and releasing the Menu button.
The Main menu appears in the first screen, and Base Station label, Radio Tx on/off status, Master/Slave status,
Base Station model, Firmware version and paired date from the GCM appears in the second screen.
Master/Slave status display
Displays the status that the Base Station is set to Master or Slave. If the Multi-Sync cable is connected between
the Base Stations and is operating normally, the Base Station set to slave displays 'On' to the right of 'Slave'.
Note:
If Menu is locked, you must unlock the Menu by pressing the Menu button for 3 seconds.
For each menu, turn the right hand rotary control(#16) clockwise to scroll down the menu items and turn counter
clockwise to scroll up the menu items. The current setting is indicated by a reversed box around the menu item.
Turn the left hand Rotary control(#10) clockwise to increase a setting and turn counter clockwise to decrease a
setting. When you have selected a setting by rotating the left hand rotary control, press that rotary control or turn
the right hand rotary control to enable the setting on the Base Station.
To exit Menu mode, press the Menu button.
Set Gains Menu
GN Mic:
Pre-amplifier: 40dB(dynamic), 20dB(electret)
Turn the left rotary control (#10) to set the gooseneck microphone input level from -8 dB to 0 dB (default 0 dB).
To confirm the selected settings, press right rotary control (#16) to return to the main menu or rotate to scroll
to the next item.
HS Mic:
Pre-amplifier: 40dB(dynamic), 20dB(electret)
Turn the left rotary control (#10) to set the microphone input level from -8 dB to 0 dB (default 0 dB). To confirm
the selected settings, press right rotary control (#16) to return to the main menu or rotate to scroll to the next
item.
1
2
3
4
5
6
7
8
BSlabel
TX Off
Slave On
BS1000 V1100
D190206
Set Gains
Pair Belt
Set Base
Reset Belt Label
Reset Belt Group
B In
B Out
C In
C Out
D In
D Out
GN Mic
HS Mic
SA
A In
A Out