Genicom LN28, Руководство пользователя

Страница: 136 / 234

Publication No. GEG-99018A Genicom Nov 00
5-40 GENICOM LN28 and microLaser 280 User Guide
Warning Messages and Error Messages
Warning Messages
The following table lists warning messages, possible causes, and the actions required to correct each
cause.
Warning Message
Line 2 of display Possible Cause Action
Tray 1 Missing Tray 1 is not installed. Install the tray.
Tray 2 Missing Tray 2 is not installed. Install the tray.
Tray 3 Missing Tray 3 is not installed. Install the tray.
Paper Low Tray 1 The paper supply in tray 1 is low. Add paper to the tray.
See “Loading the Main Tray” on
page 2-12.
Paper Low Tray 2 The paper supply in Tray 2 is low. Add paper to the tray.
Paper Low Tray 3 The paper supply in Tray 3 is low. Add paper to the tray.
Paper Out Tray 1 There is no paper in Tray 1. Add paper to the tray.
Paper Out Tray 2 There is no paper in Tray 2. Add paper to the tray.
Paper Out Tray 3 There is no paper in tray 3. Add paper to the tray.
Output Tray Full The output tray is full. Remove paper from the tray.
Offset Tray Full The offset output tray is full. Remove paper from the tray.
HCF Lifting The HCF is lifting. Wait until the HCF has finished
lifting completely.
Maintenance Req Maintenance is required. Call service.