Genexis FiberTwist Series, Руководство по установке

Страница: 3 / 9

Remove dust cap
1. Take the FiberTwist P6414/G6414 out of the box.
2. The dust cap is connected to the red string
located on the rear of the FiberTwist P6414/G6414.
3. Remove the dust cap by pulling the red string.
4. Store the dust cap in a safe place.
Twist!
1. Place the FiberTwist P6414/G6414 on the FTU/Bracket as shown in the picture below.
2. Rotate clockwise until it clicks into place.
3. Make sure the FiberTwist P6414/G6414 is aligned squarely on the FTU/Bracket.
Your FiberTwist P6414/G6414 is now installed!