FiberTwist P6414/G6414 is installed on an FTU/Bracket
Box contents
Check if the following items are in
the giftbox:
• Genexis FiberTwist P6414/G6414
• Power adapter
• Labels (self-adhesive)
Label position
The product label is positioned on the bottom
of the active device. The relevant device
information is also listed on the additional
labels included in the giftbox.
Preparation
Ensure there is a power socket
within reach of where the device
is being installed.
Important:
Instructions need to be
followed precisely and uninterrupted.
This minimizes the risk of damage (a
severe degradation of signal quality)
to the fiber optic connectors.
Warning:
Do not cover the device with
anything, this will interfere with the
ventilation of the FiberTwist.
Operation temperature 0°C ~ 40°C
Various translations of this document (if available) and additional product information can be
found on
https://genexis.eu/product/fibertwist/downloads
Installation guide
Remove Blind Cover or active device (if present)
1. Press and hold the unlock button (on the right side of the Blind Cover or active device).
2. Rotate the Blind Cover or active device counterclockwise till it blocks.
3. Remove the Blind Cover or active device from the baseplate (FTU) by pulling
it towards yourself.
4. Store the Blind Cover or active device in a safe place.
