© 2021 Genesis Attachments, LLC
Genesis GRX 33
Blade and jaw maintenance greatly affects performance.
To maximize cutting performance and optimize the life
of replaceable parts, follow this specific sequence of
checks, adjustments and maintenance.
1. Piercing Blades - replace when edges are worn.
2. Guide Blades - rotate, shim to tolerance, and
replace when worn.
3. Primary and Secondary Blades - rotate; replace
when all edges are worn. Shim lower blades to
tolerance.
4. Razor Blade - rotate and replace when all edges are
worn.
5. Welding Maintenance - perform jaw build-up and
hard-surface as needed.
Blade Bolts
Torque blade bolts every eight hours to the
specifications listed in the Genesis Fastener Manual
torque chart. Check for broken bolts daily and replace
them immediately.
1
2
4
5
5
3
5
SHEAR JAW SET MAINTENANCE
2
