© 2021 Genesis Attachments, LLC
Genesis GRX
26
Articulate the GRX body to disengage the jaw set.
Position the GRX body at the new jaw set.
Articulate the attachment body to engage the new jaw set.
Both left and right trunnion pins must be seated in the body
hooks.
JAW SET CHANGE-OVER
When the body is seated against the stop on the jaw set, the
body pins can be retracted. Press and hold the BODY switch on
the cab control box and actuate the appropriate joystick or foot
switch to retract the body pins. Release BODY switch when pins
are fully retracted.
Body pins must be retracted completely prior to lifting the jaw
set out of the jaw stand.
Lift jaw set out of the jaw stand.
Articulate the GRX Body until the upper jaw and cylinder pin
align.
Press and hold CYL switch on cab control box and actuate the
appropriate joystick or foot switch to retract the cylinder pin.
Some adjustment to the articulation may need to be done to get
the Cyl pin position correct to retract the pin. Release the CYL
switch when the pin is fully retracted.
Rotate the GRX a full 360 degrees to visually ensure all pins are
retracted completely as well as to confirm the valve has reset to
the rotate mode.
