background image

English

20V Lithium-Ion Impact Driver   

 

  

Operator’s Manual                GLID20A

MAINTENANCE

CLEANING

Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of 
commercial solvents and may be damaged by their use. use clean cloths to remove dirt, dust, oil, grease, etc.

 

WArNING: 

Do not at any time let brake fluids, gasoline, petroleum-based 

products, penetrating oils, etc., come in contact with plastic parts. Chemicals can 
damage, weaken or destroy plastic which may result in serious personal injury.

electric tools used on fiberglass material, wallboard, spackling compounds, or plaster are subject to accelerated 
wear and possible premature failure because the fiberglass chips and grindings are highly abrasive to bearings, 
brushes, commutators, etc. Consequently, we do not recommended using this tool for extended work on these 
types of materials. However, if you do work with any of these materials, it is extremely important to clean the tool 
using compressed air.

LUBRICATION

This tool is permanently lubricated at the factory and requires no additional lubrication. 

 

TWO-YEAr WArrANTY

This product is warranted free from defects in material and workmanship for 2 years after date of purchase. This 
limited warranty does not cover normal wear and tear or damage from neglect or accident. The original purchaser 
is covered by this warranty and it is not transferable. Prior to returning your tool to store location of purchase, 
please call our Toll-free Help Line for possible solutions. 

THE BATTERY INCLUDED IS WARRANTED FOR 1 YEAR AS DESCRIBED ABOVE.

THIS PRODUCT IS NOT WARRANTED IF USED FOR INDUSTRIAL OR COMMERCIAL PURPOSES. 

ACCESSORIES INCLUDED IN THIS KIT ARE NOT COVERED BY THE 2 YEAR WARRANTY. 

TOLL-FrEE HELP LINE

for questions about this or any other GeNeSIS™ Product, please call Toll-free:

  

888-552-8665

.

Or visit our web site: 

 

www.genesispowertools.com

©richpower Industries, Inc. All rights reserved

Richpower Industries, Inc.
736 Hampton Road
Williamston, SC 29697

Printed in China, on recycled paper

Содержание GLID20A












Отзывы: