English
20V Lithium-Ion Impact Driver
Operator’s Manual GLID20A
•
Always hold the tool firmly in your hands
before switching the tool “ON”. The reaction to
the torque of the motor as it accelerates to full speed may cause the tool to twist.
•
Wear eye and hearing protection
. Always use safety glasses with side shields. unless
otherwise specified, everyday glasses provide only limited impact resistance, they are not safety glasses.
use only certified safety equipment; eye protection equipment should comply with ANSI z87.1 standards.
Protective hearing equipment should comply with ANSI s3.19
standards.
•
Bits, sockets and tool get hot during operation.
Wear gloves when touching them.
•
Protect your lungs. Wear a face or dust mask
if the operation is dusty. following this rule
will reduce the risk of personal injury.
•
Always disconnect battery pack from tool
or place the switch in the locked or off position
before any assembly, adjustments or changing of accessories. following this instruction will reduce the risk
of serious personal injury.
•
Do not place battery tools or their batteries near fire or heat
. This will
reduce the
risk of explosion and
possibly personal injury.
•
Never use a battery which has been dropped or received a sharp blow.
A
damaged battery is subject to explosion. Properly dispose of a dropped or damaged battery immediately.
•
Use designated battery pack (Genesis™ -Model GLAB20A) and charger
(Genesis™- Model GLACH20AS) for this tool.
use of any other batteries may result in a
risk of fire.
WArNING:
read and understand safety and operating instructions of
designated battery and charger before using this tool. This manual contains important
safety and operating instruction for battery charger.
SAVE THESE INSTRUCTIONS
IMPOrTANT SAFETY INSTrUCTIONS FOr CHArGEr &
BATTErY
•
Save These Instructions.
This manual contains important safety and operating instructions for
your battery charger.
•
Before Using the battery Charger,
read all instructions and cautionary markings on (1) Battery
Charger, (2) Battery, and (3) Product using battery.
•
Use only the charger
which accompanied your product or direct replacements as listed in this
manual. Do not substitute any other charger.
•
Do not recharge battery in damp or wet environments
.
Do not expose battery pack to
water or rain.
•
Do not operate charger with damaged cord or plug
.
Replace immediately.
•
Do not operate charger if it has received a sharp blow,
been dropped or otherwise
damaged in any way. Take it to a qualified serviceman.
•
Do not disassemble charger or battery pack.
Take it to a qualified serviceman when
service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire
.
•
Do not charge battery pack
when temperature is below 50 degrees f (10 degrees C) or above
104 degrees f (40 degrees C). Store tool and battery pack in a location where temperature will not exceed
122 degrees f (50 degree C). This is important to prevent serious
damage to the battery cells.
•
Place charger on flat non-flammable surface
and away from flammable materials when
re-charging the battery pack
.
•
To reduce risk of electric shock,
unplug charger from outlet before attempting any
maintenance or cleaning.
• I
f operating time has become excessively shorter,
stop operating immediately. It may
result in a risk of overheating, possible burns and even an explosion.
