3
English
ELECTRICAL SAFETY
• Power tool plugs must match the outlet.
Never modify the plug in any way. Do not use any adaptor
plugs in any earthed (grounded) power tools. Double insulated tools are equipped with a polarized plug (one
blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in
the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a polarized outlet. Do
not change the plug in any way. Double insulation eliminates the need for the three wire grounded power cord
and grounded power supply system.
• Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase
the risk of electric shock.
• Avoid body contact with earthed or grounded surfaces such as pipes, radiators,
ranges and refrigerators.
There is an increased risk of electric shock if your body is grounded.
• Do not abuse the cord.
Never use the cord for carrying, pulling or unplugging the power tool. Keep cord
away from heat, oil, sharp edges or moving parts. Damaged cords increase the risk of electric shock.
• When operating a power tool outside, use an extension cord suitable for outdoor use.
These cords are rated for outdoor use and reduce the risk of electric shock.
• Do not use AC only rated tools with a DC power supply.
While the tool may appear to work.
The electrical components of the AC rated tool are likely to fail and rate a hazard to the operator.
PERSONAL SAFETY
• Stay alert,
watch what you are doing and use common sense when operating a power tool. Do not use tool
while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating
power tools may result in serious personal injury.
• Use safety equipment.
Always wear eye protection. Safety equipment such as dust mask, non-skid
safety shoes, hard hat, or hearing protection for appropriate conditions will reduce personal injuries.
• Dress properly.
Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from
moving parts. Loose clothes, jewelry or long hair can be caught in moving parts. Air vents may cover moving
parts and should be avoided.
• Avoid accidental starting.
ensure the switch is in the off position before plugging in. Carrying power tool
with your finger on the switch or plugging in power tools that have the switch on invites accidents.
• Remove any adjusting keys or wrenches before turning the power tool on.
A wrench or
key that is left attached to a rotating part of the tool may result in personal injury.
• Do not overreach.
Maintain proper footing and balance at all times. Loss of balance can cause an injury
in an unexpected situation
.
• If devices are provided for connection of dust extraction and collection facilities,
ensure these are connected and properly used.
Use of these devices can reduce dust related
hazards.
• Do not use a ladder or unstable support.
Stable footing on a solid surface enables better control of
the tool in unexpected situations.
• Keep tool handles dry, clean and free from oil and grease.
Slippery handles cannot safely
control the tool.
TOOL USE AND CARE
• Secure the workpiece.
Use clamp or other practical way to hold the workpiece to a stable platform.
Holding the workpiece by hand or against your body is unstable and may lead to loss of control.
• Do not force the power tool.
The tool will perform the job better and safer at the feed rate for which it
is designed. forcing the tool could possibly damage the tool and may result in personal injury.
• Use the correct power tool for the job.
Don’t force the tool or attachment to do a job for which it is
not designed.
• Do not use tool if switch does not turn it on or off.
Any tool that cannot be controlled with the
switch is dangerous and must be repaired or replaced by an authorized service center
.
• Turn power tool off, and disconnect the plug
from the power source and/or battery pack from the
power tool before making any adjustments, changing the accessories, or storing the tools
.
Such preventive
safety measures reduce the risk of an accidental start up which may cause personal injury
.
• Store idle tool out of reach of children and other inexperienced persons.
It is dangerous
in the hand of untrained users.
