31
/
Adjusting the brakes on the rim
Source: Shimano
®
techdocs
Spring adjusting
screws
Spring adjusting
screws
Both brake pads move
to the right
Both brake pads move
to the left
Cantilever
Opening cantilever brake
or
V-brake
•
Hold the wheel with
one hand.
•
Press the brake arms
together against the
rim
•
Hang either the brake
cable or the outer cover over one of the brake
arms.
Opening
side-pull caliper brakes:
•
Open the quick release lever on the brake arm
or lever, or:
•
If you do not have a brake quick release, de-
flate all of the air out of the tyre. Now the wheel
can be pulled out from between the brake
pads.
Side pull brake
Worn brake pads
The rubber brakes for brake pads are almost all
made with grooves and notches.
The grooves and notches help recognize
when the rubber brakes have been subject to too
much wear and tear. If the grooves and notches
aren’t visible anymore, then you must replace the
rubber brakes.
New brake blocks
Worn out brake pad
Remove hydraulic rim brake
:
•
If your system features a brake quick release,
remove the brake unit according to the instruc-
tions supplied by your manufacturer.
•
If you do not have a brake quick release, de-
flate all of the air out of the tyre.
Hydraulic rim brakes
Disk brakes:
•
The wheel can be removed without any further
preparation.
• Please note: when fitting the wheel, the disk
must be slotted between the brake linings of
the brake calliper and ultimately be centred
without contact.
Disc brakes with hydraulic or mechanical
operation
Содержание Children's bike
Страница 62: ...58 Notes...
Страница 63: ...59...
Страница 64: ...60 Notes...
Страница 67: ...U7 Please read Make note of the bicycle identification and delivery document Notes...