Genesis 11c EFORCE 2.0 Скачать руководство пользователя

Страница: 8 / 65

WWW.GENESISRESCUE.COM

SAFETY

This section of the operating manual provides a comprehensive overview of all important

safety aspects for optimal protecting operating personnel and for safe, trouble-free

operation.

Significant hazards may occur if the handling and safety instructions in this manual are not

complied with.

INTENDED USE

The hydraulic battery-powered devices are designed and tested exclusively for the intended

applications described here. All other activities are strictly forbidden.

BATTERY-POWERED DEVICES 11c EFORCE 2.0, 14c EFORCE 2.0, 15c EFORCE 2.0, 17c EFORCE

2.0, C165 EFORCE 2.0, C185 NXTGEN EFORCE 2.0, C195 NXTGEN EFORCE 2.0, C236 NXTGEN

EFORCE 2.0, S20, S45-SL EFORCE 2.0, S53 EFORCE 2.0, 21/36 EFORCE 2.0, 22/54 EFORCE 2.0

CONCRETE CRUSHER EFORCE 2.0, DOOR OPENER EFORCE 2.0

• All battery-powered devices are designed as one-man devices and

are therefore to be operated by only one person.

• The battery-powered cutting devices are used exclusively for cutting

doors and roof beams, pillars and door sills, the ring and the spokes of

the steering wheel.

• If possible, for cutting solid material, always position the material at

the base of the cutter blades closest to the pivot point, as it is equipped

with special edges for cutting round material.

• In industrial application, the devices can also be used to cut pipes,

structural steels, profiles, sheets and cables.

• The battery-powered spreading devices can be used for opening

doors, lifting vehicles or other moveable loads, pushing away and

moving vehicle parts and loads, and crushing pipes and tie bars.

• If possible, always use the tips of the spreader for crushing.

Содержание 11c EFORCE 2.0


































































Результаты поиска

Содержание 11c EFORCE 2.0

Отзывы:

Похожие инструкции для 11c EFORCE 2.0

Бренды по названию

Популярные бренды

Genesis 11c EFORCE 2.0, Руководство пользователя

Результаты поиска

Содержание 11c EFORCE 2.0

Отзывы:

Похожие инструкции для 11c EFORCE 2.0

Бренды по названию

Популярные бренды