Genesis 11c EFORCE 2.0 Скачать руководство пользователя

Страница: 9 / 65

• The tips of the spreader can also be used as a peeling tool.

• The chain set is solely to be used for pulling.

• The combi devices 11C E-Force 2.0, 14C E-FORCE 2.0, 15C E-Force

2.0, 17C E-FORCE 2.0 and 15C E-FORCE 2.0 can be used for both The

applications indicated for the C236 E-FORCE 2.0, C185 E-FORCE 2.0 and

C165 E-FORCE 2.0 and those for S45 E-FORCE 2.0. The tips of the spread-

er can also be used as a peeling tool.

21/36 RAM 22/54 RAM & Power Wedge

• The Ram and Power Wedge are designed as one-man devices and

are therefore to be operated by only one person.

• the Ram is exclusively for pushing up steering columns, vehicle roofs

and other obstacles and for pushing away vehicle body parts.

• They can also be used for supporting and bracing loads.

• The Power Wedge is used for opening doors.

WARNING!

Improper use can be dangerous!

Any improper or unintended use of the devices can be hazardous!

Therefore, make absolutely sure that:

» The devices are used only for the applications stated above.

Содержание 11c EFORCE 2.0


































































Результаты поиска

Содержание 11c EFORCE 2.0

Отзывы:

Похожие инструкции для 11c EFORCE 2.0

Бренды по названию

Популярные бренды

Genesis 11c EFORCE 2.0, Руководство пользователя

Результаты поиска

Содержание 11c EFORCE 2.0

Отзывы:

Похожие инструкции для 11c EFORCE 2.0

Бренды по названию

Популярные бренды