General Excalibur 40-200C, Руководство по установке и эксплуатации, Страница: 24 / 38

CONNECTING THE ROUTER TO THE SAFETY SWITCH
1.
Remove the top half of the power cord flange plate
from the side panel on the dust containment box A .
2.
Pass the router’s power cord through the opening as
shown in B , taking just enough cord to reach the
inlet on the back of the safety switch box.
Note: Make sure to leave enough of the router’s power
cord inside the dust containment box to allow you to
remove the lift and the router from the table opening from
above.
With the safety switch on the stand in the “off” position
A , turn or flip the switch on your router to the “on” posi-
tion and then plug the cord on the safety switch box
B
into an appropriate wall outlet.
You will now be able to turn the router on or off using
the safety switch box rather than having to reach
un-der the table to access the switch on the router.
POWER ON
POWER OFF SAFETY KEY
(PREVENTS START-UP
WHEN REMOVED)
USING THE SAFETY SWITCH
The safety switch box is equipped with a simple “on/
off” switch featuring a removable lock out safety key.
To prevent unauthorized use or unintentional start-up,
remove the safety key and store it in a safe place
whenever the router table is not in use.
A
B
A
B
BEFORE TURNING ON THE SWITCH ON YOUR ROUTER,
MAKE SURE THE SWITCH ON THE SWITCH BOX IS IN
THE OFF POSITION AND THAT THE SWITCH BOX IS NOT
YET CONNECTED TO A POWER SOURCE.
3.
Re-install the power cord flange plate and plug the
router into the inlet on the back of the safety switch.
CONNECTING TO A DUST COLLECTOR
There is a 4” dust outlet on the rear of the dust enclosure
allowing for the connection of a dust collector (not
included).
Be sure to use an appropriate size hose and fittings (not
included) and check that all connections are sealed
tightly to minimize airborne dust.
If you do not already own a dust collection system, con-
sider contacting your General® International distributor
for information on our complete line of dust collection
systems or visit our website at: www.general.ca
ALWAYS TURN ON THE DUST COLLECTOR BEFORE STAR-
TING THE ROUTER AND ALWAYS STOP THE ROUTER
BEFORE TURNING OFF THE DUST COLLECTOR.
24