General 90-200 M1, Руководство по установке и эксплуатации, Страница: 13 / 40

BASIC ADJUSTMENTS AND CONTROLS
CONNECTING TO A POWER SOURCE
To avoid risk of shock or fire do not operate the unit with a damaged power cord or plug. Replace damaged
cord or plug immediately.
1. Connect the power cord from the motor to the
inlet plug on the switch
.
To avoid unexpected or unintentional start-up,
make sure that the power switch is in the the
OFF position before connecting to a power
source.
2. Uncoil the power cord and plug it into an appro-
priate outlet (refer back to section “Electrical Re-
quirements" and make sure all requirements and
grounding instructions are followed).
POWER ON/OFF SWITCH
This model 90-200 is equipped with a simple On/Off
switch featuring a large paddle-style stop switch
, lo-
cated on the front of the bandsaw column.
- To START the bandsaw:
Push the green “ON” button .
- To STOP the bandsaw:
Push the RED “STOP” panel and wait for the blade
to come to a complete stop .
BASIC FUNCTIONS OF THE UNIT
This 15 " adjustable height wood cutting bandsaw allows the user to adjust the height of the upper frame to suit dif-
ferent cutting needs. By means of a crank handle on a smooth rack and pinion system, the saw can be adjusted to
take blades of varying lengths from 93 1/2” to 106 3/8”, allowing for a maximum resaw capacity (or maximum work-
piece height
) of up to 12” in height. Maximum inboard width of cut (space between the blade and the body of
the saw ) is 14 3/4".
This model 90-200 is designed to accommodate blade
widths from 1/4" to 3/4" and is supplied with two 3/8" wide
general purpose blades - one 93 1/2” and one 105” long.
A dual position deluxe aluminum rip fence (tall for re-
sawing or short for rip cuts) is supplied to serve as a straight-
edge to guide the workpiece for longer rip cuts. The fence
can easily be removed and set aside when not required,
for example when making curved cuts.
CLOSE UP
13