General International 40-350, Руководство пользователя

Страница: 9 / 23

1. Spacers, cutters and collars mounted on the spindle shaft must be in a fixed position. There must be
no movement, space or touching between parts.
2. Counter bores and holes of collars, cutters or spacers must be in perfect condition with no rust or
flaws.
BEFORE OPERATING
The main drive motor should run for a few seconds, to make sure that it is performing in the proper
rotation. Looking down at the spindle, it should be rotating counter-clockwise this is the proper position.
Machine should stay on for a short period of time to make sure that all moving parts are properly
positioned with no excessive vibration. If any adjustments are required disconnect machine from the
power source before properly adjusting.
WARNING !
ALL WORK OPERATORS MUST READ AND
UNDERSTAND
THE MANUAL BEFORE STARTING ANY
WORK
OPERATIONS ON THE SHAPER !
« ATTENTION !
work piece must be fed from right to left.
work piece must be fed from left to right.
CUTTER ROTATION